When Dan Phillips of Carlisle, Iowa bought his 2013 Ford Super Duty, he knew that he wanted to make it last as long as possible. A key to that longevity is found in providing the best possible lubrication for the engine. Of course Dan made the decision to use Amsoil's Premium API CJ-4 motor oil that provides superior protection in today's Ultra Low emission diesel engines, but Dan decided to take it a step further. Dan had CPS Auto and Marine in Grimes, Iowa install an Amsoil BMK28 Bypass Filter Kit. By using one of these bypass filters, engine wear caused by particles in the oil is virtually eliminated. A standard spin on oil filter typically leaves particles smaller than 20 microns in the oil. Particles larger than 4 microns will cause engine wear. An Amsoil bypass filter is 98.7% efficient at removing particles that are 2 microns or larger, leaving analytically clean oil behind. To see more information on the bypass filters, click here.
no bs shop that always exceeds expectations. A further benefit of CPS Auto and Marine can be found in the fact that they have most every Amsoil product in stock, ready for pick up or installation. If you have any questions, you can leave a comment, send an email or just give us a call!!
Thanks for reading.
Gary Van Gilst
3/9/2016 04:27:08 pm
Do you have said by-pass filter for 7.3 Ford diesel???
3/9/2016 09:04:27 pm
Hi Gary, thanks for asking!! Yes, we most definitely do have a bypass kit for the 7.3. Take a look at earlier blog posts, we have an article about a 7.3 installation. Please feel free to give me a call if you need more information or just want to talk about it. Installation usually takes about 2 hours, give or take.
3/11/2016 04:18:04 pm
Dan at CPS actually installed one on my 2003 Ford Excursion with the 7.3 motor.
Leave a Reply.
Matt Smith is the owner of K16 Synthetics. Matt and his wife Vicki are avid Motorcyclist and Boaters. K16 Synthetics, located in Johnston, Iowa serves not only Central Iowa, but the entire United States.